1. Purpose
The purpose of this document is to define how to manually program a Polycom VVX series telephone to the Broadsmart system, this would be used if the phone does not auto-provision or is going to be used in a remote location not behind a Broadsmart router.
2. Scope
This document provides the approved procedure and current method of accessing the advanced menu of the phone in order to program it to reach out to the Broadsmart servers to retrieve its configuration.
3. Process
- Select the Menu or Home button, then Settings, then Advanced Settings and enter Pass-code 943465 or 456
- Select Administration Settings, then Network Configuration, then Provisioning Server, then DHCP Menu, then Boot Server and set it to "Static"
- Select Back to go back one step in the menu
- Select Server Type and set it to "HTTP"
- Select Server Address and set it to the appropriate address below for the phone model you are programming, NOTE: the server address IS case sensitive
- For a Polycom VVX-150 - http://broadworx.broadsmart.com:80/dms/polycomvvx150/
- For a Polycom VVX-201 - http://broadworx.broadsmart.com:80/dms/polycomvvx201/
- For a Polycom VVX-250 - http://broadworx.broadsmart.com:80/dms/polycomvvx250/
- For a Polycom VVX-300 - http://broadworx.broadsmart.com:80/dms/polycomvvx300/
- For a Polycom VVX-301 - http://broadworx.broadsmart.com:80/dms/polycomvvx301/
- For a Polycom VVX-350 - http://broadworx.broadsmart.com:80/dms/polycomvvx350/
- For a Polycom VVX-400 - http://broadworx.broadsmart.com:80/dms/polycomvvx400/
- For a Polycom VVX-401 - http://broadworx.broadsmart.com:80/dms/polycomvvx401/
- For a Polycom VVX-410 - http://broadworx.broadsmart.com:80/dms/polycomvvx410/
- For a Polycom VVX-411 - http://broadworx.broadsmart.com:80/dms/polycomvvx411/
- For a Polycom VVX-450 - http://broadworx.broadsmart.com:80/dms/polycomvvx450/
- For a Polycom VVX-500 - http://broadworx.broadsmart.com:80/dms/polycomvvx500/
- For a Polycom VVX-501 - http://broadworx.broadsmart.com:80/dms/polycomvvx501/
- For a Polycom VVX-600 - http://broadworx.broadsmart.com:80/dms/polycomvvx600/
- For a Polycom VVX-601 - http://broadworx.broadsmart.com:80/dms/polycomvvx601/
- Select Back to go back one step in the menu
- Select Ethernet Menu, then VLAN Menu, then VLAN ID and make sure it is blank
- Select Back and save configuration, the phone should reboot
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article