Manual Programming of a Yealink Phone

Modified on Fri, Jul 17, 2020 at 9:14 AM

The purpose of this document is to define how to manually program a Yealink telephone to the Broadsmart system, this would be used if the phone does not auto-provision or is going to be used in a remote location not behind a Broadsmart router.

Step 1: Navigate to the Provisioning Screen

  • Select the Menu button, then Advanced and enter the Pass-code "admin" or "br0adsmart" (case specific)
  • Select Network
    • Select VLAN
      • Select DHCP VLAN and set this to "Off"
      • Select WAN Port and set this to "Off"
    • Select Auto-Provision

Step 2: Enter the URL as the appropriate option below for the model you are provisioning

Step 3: Complete the provisioning

  • Select "Save" and ten "Okay" to configure. This should bring you back to the main menu
  • Select "Basic"
    • Update Configuration (may appear on the second page)
      • Choose the Auto-Provision option
      • Select Reboot

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article